How Much Does Paver Sealing Cost in Myrtle Beach, SC?

Paver sealing in Myrtle Beach generally runs about 1.00 to 2.50 dollars per square foot, which puts a typical 600 square foot paver patio or pool deck somewhere around 600 to 1,500 dollars, and a two-car paver driveway closer to 1,000 to 2,500 dollars. A proper quote at that price covers all three steps of the job, not just the sealer itself. Here is what actually drives the number on the Grand Strand.

What is included in a paver sealing price?

Three steps, and a quote that skips one is not a sealing job. First a deep clean pulls algae, salt film, and spent sand out of the joints. Second, fresh polymeric joint sand is swept in and set, which is what locks the pavers against shifting and weeds. Only then does the sealer go down, usually in two thin coats rather than one heavy one. If a number comes in far under the ranges above, ask which of the three steps was dropped. It is almost always the re-sand, and skipping it means the sealer traps whatever is left in the joints.

What makes paver sealing cost more here than inland?

• Salt and direct sun: waterfront pavers in North Myrtle Beach and along the Intracoastal take more cleaning passes and often a heavier coat, since salt and UV wear unsealed stone down fast.
• Condition at the start: pavers that have never been sealed, with weeds rooted in the joints, add cleaning and prep time before a drop of sealer is used.
• Sealer choice: a water-based matte finish sits at the low end of the range, a solvent-based wet-look sheen at the top.
• Shape, not just size: a small pool deck full of curves, steps, and cut pieces costs more per square foot than a large plain rectangular driveway.
• Repairs first: sunken or lifted pavers need re-setting before sealing, and that is quoted separately.

How often do coastal pavers need resealing?

Plan on every two to three years along the Strand. The common guidance of three to five years assumes an inland driveway in partial shade. Pavers here take salt spray, near-constant humidity, and hard summer sun, and all three shorten a sealer's life. A shaded patio in Carolina Forest will stretch toward the long end of that window, while a west-facing pool deck in full sun will not. The easy test is water: if it soaks straight into the paver face instead of beading, the seal is done.

Can you seal pavers yourself?

You can, and the materials run roughly 0.35 to 0.75 dollars per square foot, so a DIY patio costs a few hundred dollars in product. The risk is what happens when something goes wrong. Sealing pavers that are still damp, which is easy to misjudge in Myrtle Beach humidity, traps moisture under the coating and leaves a permanent cloudy white haze. Fixing that requires chemically stripping the sealer off and starting over, and the strip alone usually costs more than having the job done correctly the first time. Coverage on how we approach it is on our Myrtle Beach paver sealing page.

Is sealing worth it, or can you skip it?

Sealing is optional in the sense that unsealed pavers will not fall apart. What it buys is stability and appearance: bound joint sand that stops ants and weeds, color that does not bleach out under coastal sun, and a surface that releases oil, rust, and sunscreen stains instead of drinking them in. On a paver driveway or pool deck that cost thousands to install, it is straightforward maintenance rather than an upgrade.

FAQ

How long before I can use a sealed patio? Foot traffic is usually fine after about 24 hours and vehicles after 48 to 72, but heat and humidity move that. On a muggy Grand Strand week, give it the longer end.

Do I have to clean the pavers first if they look fine? Yes. Sealer locks in whatever is on the surface, so any algae film or salt residue gets preserved under a clear coat.

Is sealing included when you clean my driveway? No, they are separate jobs and separate line items, but booking them together costs less than two visits. You can see the full service list and get a flat quote on our Myrtle Beach pressure washing page.